![]() |
Intelligent Roll by Roll Printing Machine of PP Woven BagThe intelligent roll by roll printing machine of PP woven bag is designed to reduce the production costs, improve the quality and shorten the production time. The machine has an automatic feeding system that can handle various widths of fabrics. Furthermore, it features a high-speed printing system that can produce rolls quickly and efficiently. Note: All technical parameter are subject to change without notice.
|
![]() |
Computer Combination Gravure Printing MachineCombination gravure printing machines are perfect for businesses that need to print a lot of flyers, brochures, and other small-scale documents. They are very affordable and have a high capacity, making them an ideal choice for printing large quantities of material quickly. Note: All technical parameter are subject to change without notice.
|
![]() |
Offset Printing Machine For PP Woven SackOffset printing machine is a perfect choice for PP woven sack printing. It has the ability to print at high speeds, making it a great option for large quantities. Additionally, the machine is easy to operate, making it ideal for small businesses. Note: All technical parameter are subject to change without notice.
|
![]() |
PP Woven Bag Printing MachinePP woven bag printing machine is designed to print PP woven bags at high speed and with great accuracy. It has a large printing area and can handle large quantities of bags quickly and easily. The machine is easy to use and can be set up in just a few minutes. Note: All technical parameter are subject to change without notice.
|
![]() |
Multi Colour Flexographic Printing MachinesMulti colour flexographic printing machines are becoming increasingly popular, both in the commercial and home printing markets. The machines come with a variety of features that allow for high-quality prints to be made in a variety of colours. They are also relatively affordable, making them a good investment for businesses or homeowners who want to print large quantities of promotional materials. Note: All technical parameter are subject to change without notice.
|
Functionality and features of PP woven bag printing machine make it an ideal choice for medium to large-scale production. The machine has a wide range of capabilities, including the ability to print on a variety of substrates, with multiple colors and patterns. Additionally, the PP woven bag printing machine is equipped with a variety of features that allow for easy operation and high quality results.
✔ Create your own designs or use pre-made designs available | ✔ No need for a large workspace, this machine takes up minimal space |
✔ Prints PP woven bags quickly and easily | ✔ No need for ink or other supplies |
✔ Easily prints multiple bags at once | ✔ Prints on both sides of the bag |
PP woven bag printing machine is specially designed for the production of PP woven bag. With high output and stable performance, this machine has become a preferred choice for many textile factories. The machine features a large print area and fast printing speed, making it ideal for producing high-quality PP woven bags quickly and efficiently.China PP woven bag Printing Machine supplier,factory - YIRAN is specially engaged in producing PP woven bag printing machines. With advanced equipment and experienced workers, we are able to provide tailor-made PP woven bag printing machines for our customers. Our machines have been exported to many countries and regions and have won positive feedback from customers.
![]() |
![]() |
FACTORY ENVIRONMENT |
EQUIPMENT MANUFACTURING |
![]() |
![]() |
![]() |
DEBUG INSTALLATION |
Customers gain insight into the product |
Offoce environment |
![]() |
![]() |
Packaging Design & Development |
Custom Machine Engineering |
![]() |
![]() |
![]() |
Integration |
Retrofitting & Customizing |
Installation/Validation |
1. During the test run, check whether there is lubricating oil in each part of the gear.
2. Before the test run, pay attention to check that there is no dirt or small hard objects on the top of the printing machine and the anilox roller, otherwise the expensive anilox roller will be scrapped as a whole, resulting in huge economic losses.
3. The ink rubber roller and the anilox roller should be in a separated state before starting the machine, so that the large handwheel can be used to turn the paper feeding and pressing roller shaft to make the whole machine rotate. If the rotation is flexible and abnormal, remove the large handwheel before testing the machine.
4. Check and make the motor speed control knob at the zero position before turning on the power supply, turn the head on the controller to the position where it can be, turn the head of the speed control from the zero position to the position where the machine can be started, and check with the lowest speed Check whether the rotation direction of the main drum is correct, and then run for 10-15 minutes each according to the speed mark of the tachometer.
5. After stopping, use the big handwheel to turn the paper feeding and pressing roller shaft again, put the printed cardboard under the roller, and adjust the gap between the pressing paper roller and the printing roller to make it suitable for the thickness of the cardboard used (too tight will damage the cardboard, Too loose will cause inaccurate printing position).
1. Start the compressor first, put the small ink bucket with the ink on it under the air pump, start the air pump to suck the ink on the top of the machine board, and now make the rubber roller and the anilox roller run at the same time, the whole machine can start to work.
2. Check the ink thickness of the anilox roller. If the thickness is too large, it should be considered that the viscosity of the ink is too high, and it should be diluted with a little water. If the diluted ink is still very thick, and the pressure between the two rollers is small and the ink leaks, it is necessary to adjust the center distance between the two ink transfer rollers.
3. Adjust the amount of ink and print on paper. It is necessary to observe whether there is ink sucked up to ensure that the rubber roller will not be damaged due to the absence of ink.
4. When the production task is completed or the machine stops after work, the main machine is stopped first, but the printing rubber roller and the anilox are still not separated, and they are still in working state (after the main motor stops, the rubber roller motor will turn, and the rubber roller will drive the mesh spinning roller), Use clean water instead of printing ink to clean the printing rubber roller, anilox roller and ink inlet and outlet pipelines. After cleaning, the rotation of the printing rubber roller can be stopped, and then the small handwheel is turned to keep the printing rubber roller and the anilox roller in a separated state, so as not to damage the printing rubber roller and prolong the service life of the two rollers.
1. There should be no foreign objects on the paper feeding table, so as not to damage the machine parts.
2. It is strictly forbidden to feed two or more cardboards at the same time.
3. It is strictly forbidden to start the machine without oil in the gearbox.
4. The speed control knob must be reset to zero before starting to avoid the phenomenon of flying over the country after the host is started.
5. When starting up, it is strictly forbidden to touch the rotating parts to prevent hand clamping.
6. It is necessary to frequently check whether each pair of red stacking of the conveyor chain is on the same parallel line, so as to avoid skewing when conveying cardboard.
8. The ink must be used after the concentration is appropriate and fully stirred to avoid damage to the rubber roller.
1. Fill the lubricating parts of the equipment with lubricating oil on time, do a good job of cleaning frequently, and keep the oil circuit of the equipment unblocked.
(1) An oil pump is installed in the gear box of the main engine to carry out spray-type circulating lubrication for the transmission gear. The lubricating oil is 20# mechanical oil, which is replaced once a year.
(2) The conveyor chain and the power input chain of the workbench are lubricated with 40# oil, and refueled once a month.
(3) Each rolling bearing is lubricated with 2# calcium-based grease, and there is a special oil cup, which is refueled every three months.
2. Always pay attention to the operation of the equipment, and if any abnormality is found, it should be shut down for maintenance in time to avoid major accidents.
3. Always pay attention and keep the machine clean and well done.
Wenzhou Yiran Import & Export Co., Ltd. is based in Wenzhou, China,with more than 15 years experiences of plastic machinery that offers machines to clients at reasonable prices and best service.
Expansion of the infrastructure by installing latest machines for printing, slitting, packing along with continuous development keeps us at the forefront of the industry. We are a technology advanced and customer led company, focused to meet clients expectations by offering exact products as per their requirements.