• email

    yiran-machine@foxmail.com

  • tel

    Mobile:+86-13868589622

  • facebook
  • YouTube
close
navbtn

Learn maintenance procedures with a circular loom manufacturer

icon2022-07-28

 

Learn maintenance procedures with a circular loom manufacturer

 

No matter how good the quality of machinery and equipment, if it cannot be maintained in time in daily use, it will easily lead to the service life of the equipment. The use of circular looms is also the same. In order to improve the service life of the equipment , what should we pay attention to?

 

 

1. End weft sensor:

 

Clean the detector cover regularly (once every four hours). When the machine is running, make sure that the white light is always on. The detector is designed according to the principle of infrared rays. The dazzling light will affect the performance of the sensor. Try to use only sunlight tubes near the machine. If the surface of the spindle is shiny, the detector may not work accurately, avoid using aluminum bobbins or black bobbins, black yarn will make the detector inoperable.

 

A China circular loom factory is a type of textile mill that uses a circular loom to weave fabric. The loom is operated by a machine called a dobby, which weaves the fabric from yarns that are fed through the heddles of the loom. The fabric is then wound onto a roll and taken off the loom.

 

The China Circular Loom Factory is a type of loom that is used to weave fabric in a continuous circle. This type of loom is often used for making rugs, wall hangings, and other types of fabric art. The Circular Loom Factory is a very versatile type of loom and can be used to create a wide variety of different fabric patterns.

 

A China circular loom factory is a type of textile manufacturing facility that specializes in the production of fabrics using a circular loom. These factories are often located in areas with a high concentration of textile mills and other fabric-producing businesses. The fabrics produced by a circular loom factory are used in a variety of applications, including clothing, upholstery, and industrial products.

 

2. Weft break sensor:

 

In the normal operation of the circular loom, when the weft thread breaks due to external force, the sensor detects the signal and transmits it to the controller to control the circular loom to stop. If the weft thread is broken, the machine cannot stop automatically: jog the machine to make The yarn guide tube of a shuttle runs to the bottom of the sensor, and the weft is manually and quickly torn off, so that the steel ball enters the detection range of the sensor. At this time, if the red indicator light of the sensor does not light up, adjust the position of the sensor until the red indicator light is on or replace the sensor.

 

A circular loom wholesaler is a company that sells looms to manufacturers who use them to weave cloth. The wholesaler may also sell other textile equipment, such as yarns and threads. In order to be successful, the wholesaler must have a good understanding of the textile industry and the needs of its customers. The wholesaler must also be able to provide a variety of products at competitive prices.

 

A circular loom wholesaler is a type of business that supplies and distributes circular looms to retailers. These wholesaler typically have a wide variety of ODM and OEM products that they can offer their customers, which gives them the ability to cater to the specific needs of each individual retailer. In addition, circular loom wholesalers often have relationships with multiple manufacturers, which allows them to offer their customers competitive pricing on the products they need.

 

3. Main speed detection sensor:

 

During the normal operation of the machine, if the jumping range of the boosted frequency conversion frequency is large, it may be that the sensor has missed the detection of the rotation of the host due to vibration. At this time, it is necessary to adjust the position of the sensor so that the head of the sensor is aligned with the toothed plate, and then observe the increase of the frequency conversion frequency. If it beats within a small range, that's fine. After several adjustments, the effect cannot be achieved, and the sensor should be replaced.

 

Circular loom suppliers usually sell their products to companies that make textile products, such as clothing or upholstery. The looms can be used to make a variety of different fabrics, including cotton, linen, and synthetic materials. There are many different types of circular looms available on the market, and each has its own set of features and capabilities.

 

There are many circular loom suppliers to choose from, but it is important to select a supplier that has a good reputation and can provide a high quality product. Selecting a reputable supplier will ensure that you receive a product that meets your expectations and requirements. Furthermore, a good supplier will be able to provide you with support and advice if you have any problems or questions.

 

4. Lift the detection sensor:

 

If the man-machine interface cannot accurately record the output, check whether the wiring is correct. If the wiring is correct, adjust the position of the sensor, run the machine, and observe whether the indicator light is flashing. If it does not flash, consider replacing the sensor.

 

A circular loom producer is a company that manufactures looms for the textile industry. These machines are used to weave fabric from yarn or thread. The circular loom is a type of loom that uses a rotating disk to create even, consistent fabric. This type of machine is often used for making blankets, towels, and other types of cloth.

 

A Circular Loom Producer is a machine that is used to weave fabric in a circular shape. The machine is operated by a series of levers and pulleys that control the movement of the warp and weft threads. The Circular Loom Producer produces fabric that is used in a variety of applications, including clothing, upholstery, and towels.

 

A circular loom producer is a machine that produces circular fabrics. The machine consists of a loom, a shuttle, and a beam. The loom weaves the fabric while the shuttle moves back and forth to create the desired pattern. The beam holds the fabric in place while it is being woven.

 

Repair of shuttle of circular loom

 

For the production unit with repairing ability, adopting the repairing method for the worn crusher main parts can achieve the effect of quick return and saving money. So here is a brief introduction to the repair of several main parts.

 

A circular loom China factory is a type of textile factory that produces cloth using a circular loom. These China factories are typically used to produce large quantities of fabric, such as canvas or denim.

 

A circular loom China factory is a facility where circular looms are manufactured. These looms are used to weave fabric in a circular pattern. The China factory will typically have a variety of machines to create the different parts of the loom, as well as assembly lines to put the looms together. The finished products are then shipped to customers all over the world.

 

A circular loom China factory is a type of textile mill that uses a circular loom to weave fabric. The circular loom is a machine that weaves fabric in a continuous circle, allowing for the creation of long lengths of fabric without the need to splice together shorter pieces. Circular loom factories are typically used to produce fabric for clothing, upholstery, and other applications requiring long lengths of fabric.

 

Repair of several major parts

 

Repair of tooth plate The tooth plate of jaw crusher is the part that is in direct contact with the material. It wears quickly and has a relatively short life. Generally, it is 1 to 3 months, and some even need to be replaced in only 1 to 2 weeks. When the tooth peak of the tooth plate is ground away from 1/2~2/3 of the tooth height, it should be replaced. If the local wear of the tooth plate is serious, it can be repaired by surfacing welding, and the pile 256 or pile 266 welding rod can be used. The following measures should be taken before surfacing welding.

 

1. Before welding, grind the surface of the welding part with a grinding wheel to remove 2~3mm.

 

2. Try to avoid too much heat of the parent body during welding, and hammer the weld after welding to clear the internal stress of welding.

 

 3. The sequence of surfacing welding is to first weld one layer on all teeth on the tooth plate, and then weld the second layer

 

A circular loom supplier is a company that provides the machines used in the textile industry to weave fabric from yarn or thread. The machines are called looms and the process is called weaving. There are many different types of looms, but the most common type is the circular loom.

 

Circular looms are used to weave fabric for a variety of purposes, including clothing, upholstery, and blankets. The machines can be set up to weave a variety of patterns and designs into the fabric, depending on the needs of the customer. The loom supplier will typically provide all of the necessary equipment and supplies needed to operate the machine, as well as training on how to use it.

 

Various aspects of the repair of the shuttle of the circular loom

 

 In order to ensure the normal operation of the jaw crusher, in addition to correct operation, planned maintenance must be carried out, including daily maintenance inspections, minor repairs, medium repairs and major repairs. Start-up of jaw crusher

 

1. After inspection, it is proved that the machine and transmission parts are in normal condition before starting.

 

2. The machine can only be started under no-load conditions.

 

3. After starting, if any abnormal situation is found, it should be stopped immediately, and it can be restarted only after the cause is identified and the hidden danger is eliminated.

 

A circular loom wholesaler is a company that specializes in the sale of circular looms. Circular looms are machines that are used to weave fabric, and they are typically used in the production of clothing and other textile products. Wholesalers typically sell their products to manufacturers or other businesses that use them in the production process, rather than to individual consumers.

 

A circular loom is a type of loom that is used to weave fabric in a circular pattern. This type of loom is often used to weave rugs or tapestries. It can be operated by hand or by machine. Circular looms are also used to create circular knitting patterns. Wholesalers of this type of loom typically sell them to manufacturers who then use them to produce goods for sale.

 

Maintenance and use of jaw crusher

 

1. After the crusher is in normal operation, the material can be fed.

 

2. The material to be crushed should be evenly added into the crushing cavity, and side feeding should be avoided to prevent sudden load changes or unilateral sudden increases.

 

3. Under normal working conditions, the temperature rise of the bearing should not exceed 35 °C, and the higher temperature should not exceed 70 °C, otherwise it should be stopped immediately, and the cause should be identified and cleaned up.

 

4. Before stopping, stop feeding, and wait until the crushed material in the crushing cavity is completely emptied

 

A circular loom manufacturer is a company that produces looms for weaving cloth. These manufacturer usually produce a variety of different looms, including those for industrial and commercial use. Some manufacturers also produce looms for home use. The most common type of circular loom is the handloom, which is operated by hand. Other types of circular looms include power looms, jacquard looms, and dobby looms.

 

A circular loom manufacturer is a ODM and OEM company that produces looms for weaving fabric. There are many different types of looms, and each has its own strengths and weaknesses. The most common type of loom is the handloom, which is operated by hand. Other types of looms include power looms, which are operated by electricity, and computerized looms, which are operated by computers.

 

What are the working principles of the woven bag circular loom

 

Do you know the circular loom? In fact, the quality of the circular loom greatly affects the quality of the woven bag, so today we will explain the working principle of the circular loom.

 

Laminator Factory is a leading supplier of laminators and supplies. We offer a wide range of machines for all your lamination needs. From business cards to ID cards, we have a machine to meet your needs. We also offer a variety of supplies, including laminated bags and films.

 

Laminator Factory is a leading manufacturer of laminators. The company has been in business for more than 10 years and is renowned for its high-quality products and excellent customer service. Lamination Machine Factory offers a wide range of laminators, including models for home and office use.

 

Laminator Factory is a leading manufacturer of laminators. The company has been in business for more than 10 years and offers a wide range of machines for different purposes. Lamination Machine Factory provides machines for commercial and industrial use, the company also manufactures custom machines.

 

 

 

Circular loom let-off mechanism - warp creel and let-off roller

 

Generally, the steel pipe or section steel is used as the skeleton, and the support shafts and backing plates of the warp bobbins are arranged and arranged in rows. The warp roll has no power and is wound by the flat yarn drawn by the main machine. It is suitable for the winding of high-concentration flat yarn. The active let-off roll is also called the automatic let-off roll.

 

Laminator Factory is a leading supplier of laminators and lamination supplies. We offer a wide selection of laminators for all your needs including thermal laminators cold laminators and roll laminators. We also carry a full line of lamination supplies such as lamination pouches laminating film and laminate sheets .

 

A laminator China factory supplier is a China factory that manufactures laminators. Laminators are machines that are used to laminate documents. The process of lamination protects the document from wear and tear and it also makes the document more durable. There are many different types of laminators on the market and each type has its own set of features. When you are looking for a laminator China factory supplier you will want to find a China factory that offers a wide variety of laminators so that you can choose the one that best meets your needs.

 

Winding mechanism of circular looms - upper traction system and retractor

 

The upper traction system is driven by the host at the same time, the weft density is changed by the weft changing gear, the speed is reduced by the reducer, and the cloth roll is drawn by a pair of flat rollers through the winder, and is wound and woven through a torque motor, a reducer and a two-roller plane. cloth.

 

The circular loom is a great way to save time and money when you need to weave large projects. With a little practice you can produce beautiful professional-looking fabrics quickly and easily. The best part is that the circular loom is very affordable so you can get started on your weaving journey without breaking the bank.

 

A circular loom wholesaler is a great place to find all the materials you need to create beautiful and unique pieces of fabric art. From looms to yarns and everything in between a wholesaler can provide you with everything you need to get started on your next project.

 

The circular loom wholesaler is a great resource for those who are looking to buy looms at a discount. The website provides a wide variety of looms and other weaving supplies as well as a forum where users can discuss their projects and share tips.

 

Electrical control system

 

The electronic control system is composed of electrical components, which mainly control warp stop, weft stop, main engine start and stop, let-off system, winding system, frequency conversion speed regulation circular loom, etc. The control system is equipped with a frequency converter.

 

In a word, through the detailed introduction of the working principle and operating system of the circular loom, on the basis of helping everyone to know more about the circular loom, this article has a better grasp of the method of operating the circular loom, improved the flat wire process, and improved the weaving process. bag quality.

 

The circular loom producer is a type of loom that is used to weave fabric in a circular shape. It is a very efficient type of loom and can be used to produce large quantities of fabric in a short amount of time. The circular loom producer is a great choice for those who need to produce large quantities of fabric for their business or project.

 

A circular loom is a loom that is circular in shape. It is used to weave cloth and tapestries. The circular loom was invented in the late 18th century and was used extensively in the 19th century. The circular loom is still used today although it has been replaced by other looms in many cases.

 

The circular loom producer is a machine that can be used to create cloth and fabric. It is a versatile machine that can be used to create a variety of different fabrics and cloths. The machine is easy to use and can be operated by one person.

 

Where to buy a printing machine?

 

Wenzhou Yiran Import & Export Co., Ltd. is based in Wenzhou, China,with more than 15 years experiences of plastic machinery that offers machines to clients at reasonable prices and best service. 

 

Expansion of the infrastructure by installing latest machines for printing, slitting, packing along with continuous development keeps us at the forefront of the industry. We are a technology advanced and customer led company, focused to meet clients expectations by offering exact products as per their requirements.

chenggong
Thank You!

Your information has been sent to us, we will reply you shortly

OK
shibai
Bad!

No success, please try again!

Try Again